t4 - lds - 0245 , rev . 2 ( 5/ 31 /13 ) ?201 3 microsemi corporation page 1 of 6 1n4614 ur -1 C 1n4627 ur -1e3, 1n4099 ur -1 C 1n4135 ur -1e3 available on commercial versions 500 mw metallurgically bonded glass surface mount zener diodes qualified per mil - prf - 19500/435 qualified levels : jan, jantx, jantxv and jans d escription the 1n4099ur - 1 thr ough 1n4135ur - 1 and 1n4614ur - 1 thr ough 1n4627ur - 1 series are 500 mw, zener voltage regulators in the surface mount, glass do - 213aa package. voltages from 1.8 to 100v in 5%, 2%, and 1% tolerances are available. they are cons tructed with an internal metallurgical bond and are mil - qualified up to the jans level for high reliability applications. do - 213aa package also available in : do - 35 package (axial - leaded) 1n4099 -1 C 1n4135 -1 and 1n4614 -1 C 1n4627 -1 do - 216 package ( tabbed surface mount ) 1 pmt 4 099 C 1 pmt 4135 and 1 pmt 4614 C 1 pmt 4627 impor tant: for the latest information, visit our website http://www.microsemi.com . features ? surface mount equivalent to jedec registered 1n4099 thr ough 1n4135 and 1n4614 thr ough 1n4627 series . ? internal metallurgica l bond . ? max noise density 40 v / h z for 6.8 v and up. falls quickly to 1 v / h z at lower voltages. ? jan, jantx, jantxv and jans qualification s are availabl e per mil - prf - 19500/435 . ? this series is also available commercially with the cdll prefix (cdll4099 - 1 C cdll4135 - 1 and cdll4614 - 1 C cdll4627 -1). this cdll prefix also replaces the mll prefix on prior devices . ? rohs compliant versions available (commercial grade only) . applications / benefits ? regulates voltage over broad ranges of current and temperature . ? extensive selection from 1.8 to 100 volts . ? voltage tolerances of 5% (standard), 2% and 1% are available . ? hermetically sealed surface mount package . ? non - sensitive to esd per mil - std - 750 m ethod 1020 . ? minimal capacitance (see f igure 3 ). ? inherently radiation hard as described in microsemi micronote 050 . maximum ratings @ t c = +25 oc unless otherwise specified msc C law rence 6 lake street, lawrence, ma 01841 tel: 1- 800 - 446 - 1158 or (978) 620 - 2600 fax: (978) 689 - 0803 msc C ireland gort road business park, ennis, co. clare, ireland tel: +353 (0) 65 6840044 f ax: +353 (0) 65 6822298 website: www.microsemi.com parameters/test conditions symbol value unit junction and storage temp erature t j and t stg -6 5 to +1 75 o c thermal resistance junction - to - ambient (1) r ? ja 30 0 o c /w thermal resistance junction - to - end cap r ? jec 10 0 o c /w rated average power dissipation (2) p m(av) 0.5 w for w ard voltage @ 200 ma v f 1.1 v solder temperature @ 10 s 260 o c notes : 1. w hen mounted on fr4 pc board (1 oz cu) with r ecomme nded footprint (see last page ). 2. the 0.5 w linearly derates starting at t ec = 125 c and goes to zero at 175 c . for ambient t a condition on a typical pc board, it linearly derates from 500 mw starting at 25 c and goes t o zero at 175 c (see figure 2 ). downloaded from: http:///
t4 - lds - 0245 , rev . 2 ( 5/ 31 /13 ) ?201 3 microsemi corporation page 2 of 6 1n4614 ur -1 C 1n4627 ur -1e3, 1n4099 ur -1 C 1n4135 ur -1e3 mechanical and packag ing ? case: hermetically sealed glass do - 213aa (sod80 or cdll 34) melf style package . ? terminals : t in - lead or rohs c ompliant annealed matte -t in (on commercial grade only) plating . s olderable per mil - std - 750, method 2026 . ? polarity: cathode indicated by ba nd ed end. d iode is to be operated with the banded end positive with respect to the opposite end for zener regulation . ? marking: c athode band only. ? tape & reel option: standard per eia - 481 -1- a with 12 mm tape (add tr suffix to part number) . consult f actory for quantities. ? weight: approximately 0.04 grams . ? see p ackage d imensions on last page. part nomenclature jan 1n4099 c ur -1 (e3) reliability level jan = jan level jantx = jantx level jantxv = jantxv level jans = jans level blank = commercial jedec type number ( see electrical characteristics t able ) zener voltage tolerance b lank = 5% c = 2% d = 1% rohs compliance e3 = rohs c ompliant ( available on comme rcial grade only ) blank = non - rohs c ompliant metallurgical ly bond ed surface mount package cdll 4099 c -1 (e3) microsemi designation jedec type number ( see electrical characteristics t able ) zener vo ltage tolerance blank = 5% c = 2% d = 1% rohs compliance e3 = rohs c ompliant blank = non - rohs c ompliant metallurgically bonded downloaded from: http:///
t4 - lds - 0245 , rev . 2 ( 5/ 31 /13 ) ?201 3 microsemi corporation page 3 of 6 1n4614 ur -1 C 1n4627 ur -1e3, 1n4099 ur -1 C 1n4135 ur -1e3 symbols & definitions symbol definition vz temperature coefficient of regulator voltage: the change in regulato r voltage divided by the change in temperature that caused it expressed in %/c or mv/ c. i r reverse current: the maximum reverse (leakage) current that will flow at the specified vol tage and temperature. i z , i zt , i zk regulator current: the dc regulator current (i z ), at a specified test point (i zt ), near breakdown knee (i zk ). i zm maximum regulator (zener) current: the maximum rated dc current for the specified power rat ing. n d noise density: the noise generated over a specified frequency bandwidth u sually specified in terms of mv/ hz. v r reverse voltage: the reverse voltage dc value, no alternating component. v z zener voltage: the z ener voltage the device will exhibit at a specified current (i z ) in its breakdown region. z zt or z zk dynamic impe dance: the small signal impedance of the diode when biased to operate in its breakdown region at a specified rms current modulation (typically 10% of i zt or i zk ) and superimposed on i zt or i zk respectively. downloaded from: http:///
t4 - lds - 0245 , rev . 2 ( 5/ 31 /13 ) ?201 3 microsemi corporation page 4 of 6 1n4614 ur -1 C 1n4627 ur -1e3, 1n4099 ur -1 C 1n4135 ur -1e3 electrical characteristics @ 25 c unless otherwise stated industry part number (note 1) microsemi part number (note 1) nominal zener voltage v z @ i zt (note 2) zener test current i zt maximum zener impedance z zt (note 3) maximum reverse current i r @ v r maximum noise density n d @ i zt maximum zener current i zm maximum temp.coeff. of zener voltage vz v olts a o hms a volts v/ hz ma %/ o c 1n4614ur -1 1n4615ur -1 1n4616ur -1 cdll4614 -1 cdll4615 -1 cdll4616 -1 1.8 2.0 2.2 250 250 250 1200 1250 1300 3.5 2.5 2.0 1.0 1.0 1.0 1 1 1 120.0 110.0 100.0 - 0.075 -0 .075 - 0.075 1n4617ur -1 1n4618ur -1 1n4619ur -1 1n4620ur -1 cdll4617 -1 cdll4618 -1 cdll4619 -1 cdll4620 -1 2.4 2.7 3.0 3.3 250 250 250 250 1400 1500 1600 1650 1.0 0.5 0.4 3.5 1.0 1.0 1.0 1.5 1 1 1 1 95.0 90.0 87.0 85.0 - 0.075 - 0.075 - 0.075 - 0.075 1n4621ur -1 1n4 622ur -1 1n4623ur -1 1n4624ur -1 cdll4621 -1 cdll4622 -1 cdll4623 -1 cdll4624 -1 3.6 3.9 4.3 4.7 250 250 250 250 1700 1650 1600 1550 3.5 2.5 2.0 5.0 2.0 2.0 2.0 3.0 1 1 1 1 83.0 80.0 77.0 75.0 - 0.065 - 0.060 - 0.050 - 0.0 5 0,+0.020 1n4625ur -1 1n4626ur -1 1n4627ur -1 1 n4099ur -1 cdll4625 -1 cdll4626 -1 cdll4627 -1 cdll4099 -1 5.1 5.6 6.2 6.8 250 250 250 250 1500 1400 1200 200 5.0 5.0 5.0 1.0 3.0 4.0 5.0 5. 2 2 4 5 40 70.0 65.0 61.0 56.0 - 0.045,+0.030 - 0.020,+0.040 - 0.010,+0.050 + 0.060 1n4100ur -1 1n4101ur -1 1n4102ur -1 1n4103u r-1 cdll4100 -1 cdll4101 -1 cdll4102 -1 cdll4103 -1 7.5 8.2 8.7 9.1 250 250 250 250 200 200 200 200 1.0 0.5 0.5 0.5 5.7 6.3 6.7 7.0 40 40 40 40 51.0 46.0 44.0 42.0 + 0.065 + 0.070 + 0.075 + 0.080 1n4104ur -1 1n4105ur -1 1n4106ur -1 1n4107ur -1 cdll4104 -1 cdll4105 -1 c dll4106 -1 cdll4107 -1 10.0 11.0 12.0 13.0 250 250 250 250 200 200 200 200 0.5 0.05 0.05 0.05 7.6 8.5 9.2 9. 9 40 40 40 40 38.0 35.0 32.0 29.0 + 0.080 + 0.080 + 0.080 + 0.080 1n4108ur -1 1n4109ur -1 1n4110ur -1 1n4111ur -1 cdll4108 -1 cdll4109 -1 cdll4110 -1 cdll4111 -1 14.0 15.0 16.0 17.0 250 250 250 250 200 100 100 100 0.05 0.05 0.05 0.05 10.7 11.4 12.2 13.0 40 40 40 40 27.0 25.0 24.0 22.0 + 0.085 + 0.085 + 0.085 + 0.090 1n4112ur -1 1n4113ur -1 1n4114ur -1 1n4115ur -1 cdll4112 -1 cdll4113 -1 cdll4114 -1 cdll4115 -1 18.0 19.0 20.0 22.0 250 250 250 250 100 150 150 150 0.05 0.05 0.01 0.01 13.7 14.5 15.2 16.8 40 40 40 40 21.0 20.0 19.0 17.0 + 0.090 + 0.090 + 0.090 + 0.090 1n4116ur -1 1n4117ur -1 1n4118ur -1 1n4119ur -1 cdll4116 -1 cdll4117 -1 cdll4118 -1 cdll4119 -1 24.0 25.0 27.0 28.0 250 250 2 50 250 150 150 150 200 0.01 0.01 0.01 0.01 18.3 19.0 20.5 21.3 40 40 40 40 16.0 15.0 14.0 14.0 + 0.090 + 0.090 + 0.090 + 0.095 1n4120ur -1 1n4121ur -1 1n4122ur -1 1n4123ur -1 cdll4120 -1 cdll4121 -1 cdll4122 -1 cdll4123 -1 30.0 33.0 36.0 39.0 250 250 250 250 200 200 200 200 0.01 0.01 0.01 0.01 22.8 25.1 27.4 29.7 40 40 40 40 13.0 12.0 11.0 9.8 + 0.095 + 0.095 + 0.095 + 0.095 1n4124ur -1 1n4125ur -1 1n4126ur -1 1n4127ur -1 cdll4124 -1 cdll4125 -1 cdll4126 -1 cdll4127 -1 43.0 47.0 51.0 56.0 250 250 250 250 250 250 300 300 0.01 0.0 1 0.01 0.01 32.7 35.8 38.8 42.6 40 40 40 40 8.9 8.1 7.5 6.7 + 0.095 + 0.095 + 0.100 + 0.100 1n4128ur -1 1n4129ur -1 1n4130ur -1 1n4131ur -1 cdll4128 -1 cdll4129 -1 cdll4130 -1 cdll4131 -1 60.0 62.0 68.0 75.0 250 250 250 250 400 500 700 700 0.01 0.01 0.01 0.01 45.6 47 .1 51.7 57.0 40 40 40 40 6.4 6.1 5.6 5.1 + 0.100 + 0.100 + 0.100 + 0.100 1n4132ur -1 1n4133ur -1 1n4134ur -1 1n4135ur -1 cdll4132 -1 cdll4133 -1 cdll4134 -1 cdll4135 -1 82.0 87.0 91.0 100.0 250 250 250 250 800 1000 1200 16 00 0.01 0.01 0.01 0.01 62.4 66.2 69.2 76.0 40 40 40 40 4.6 4.4 4.2 3.8 + 0.100 + 0.100 + 0.100 + 0.100 see notes on next page. downloaded from: http:///
t4 - lds - 0245 , rev . 2 ( 5/ 31 /13 ) ?201 3 microsemi corporation page 5 of 6 1n4614 ur -1 C 1n4627 ur -1e3, 1n4099 ur -1 C 1n4135 ur -1e3 note 1: these may be ordered as either 1n4614ur - 1 thru 1n4627ur - 1 and 1n4099ur - 1 thru 1n4135ur - 1 or cd ll4614 - 1 thru cd ll4627 - 1 and cd ll4099 - 1 thru cd l l4135 - 1. for 1n military types, add the jan, jantx, jantxv prefix for required screening to the indu stry part number. note 2: the jedec type numbers shown above have a standard tolerance of +/ - 5% on the nominal zener voltage. v z is measured with the diode in thermal equilibrium (still air) at 25 o c for end - cap terminations . note 3: zener impedance is derived by superimposing on i zt a 60 hz rms ac current at 10% of i zt . see micronote 202 for z zt variation with i z . graphs figure 1 C noise density measurement circuit noise density, (n d ) is specified in microvolt - rms per square - root - hertz. actual measurement is performed using a 1 khz to 3 khz frequency bandpass filter at a constant zener test current (i zt ) at 25 o c ambient temperature. n d is calculated from the formula. zener voltage v z figure 3 C capacitance vs. zener voltage (typical ) temperature ( o c) figure 2 C power derating curve p d rated power dissipation (mw) typical capacitance in picofarads (pf) downloaded from: http:///
t4 - lds - 0245 , rev . 2 ( 5/ 31 /13 ) ?201 3 microsemi corporation page 6 of 6 1n4614 ur -1 C 1n4627 ur -1e3, 1n4099 ur -1 C 1n4135 ur -1e3 package dimensions pad layout dim inch millimeters min max min max bd 0.063 0.067 1.60 1.70 bl 0.130 0.146 3.30 3.71 ect 0.016 0.022 0.41 0.56 s 0 .001 min 0.03 min inch mm a 0 .200 5.08 b 0 .055 1.40 c 0 .080 2.03 downloaded from: http:///
|
